Structural design of machining center of DMC-2513S in Longmen
Six parts of the casting:
First, the base design (exclusive design)
1 series of casting using the international standard meter Hanna casting material strictly to FC-30 standard, supporting the large famous Taiwan casting factory, reliable never cut corners, all castings after tempering, vibration aging treatment, natural aging treatment, eliminate the internal stress, in order to ensure the casting never deformation, precision and rigid requirements to meet customer.
The 2 base design of Shuangshan type structure, more rigid structure, eliminating vibration generated, providing strong structural rigidity, one-piece design special closed box stability, is the preferred high-end machine processing, mold industry.

（Schematic diagram of the base）

Two, beam design (exclusive design)
Large span beam design 1, anti L type structure, superior to other manufacturers to increase 25%, combination of strength and beauty, the weight can reach 5um in suspension force.

（Schematic diagram of beam）

Three, column design (exclusive design)
1 columns and the base with large contact area design, solid rock, rigid, rigid, and the joint use of Taiwan exquisite shovel flower technology, accuracy comparable to Europe and Japan, long-term processing accuracy stability.

（Schematic diagram of column）

Four, work station design (exclusive design)
Table 1 ultra thick design, can carry heavy workpiece, worktable and roller sliders for the whole solid contact surface, and the joints by Taiwan fine scraping process, ensure high precision plane.
2 with high-tech high-quality processing enterprises in Taiwan, the plane through the precision grinding process, long-term to maintain the working table plane accuracy, and the appearance of the smooth and shiny, long-term to maintain the overall accuracy of the whole.

（Table sketch map）

Five, sliding block design (exclusive design)
1 the entire block uses a large number of densely distributed slider, the coverage rate of more than 50%, there are rigid rail rigid, and the track of the sliding, the best balance of the core configuration.

（Schematic diagram of slide block）

Six, the main shaft box and gear box design (patent design)
The 1 China patent design of spindle box, ram for large area rectangular track, the design of the eight sliding contact surface, resistant to heavy cutting, processing efficiency is high, and a variety of collocation manual and semi-automatic, fully automatic side milling machine, five axis five face milling head surface machining center has become the five most economical and practical the,
Especially suitable for processing large automotive mold, precision mold processing.
2 strong mechanical rigidity, at the same time can be used with all kinds of high-speed spindle, the maximum speed of BT50# can reach 10000 rpm for precision die 3D surface processing die surface smooth and delicate, to achieve high precision requirements.
3 imported gear modular gearbox design, ensure strong cutting, bevel cutting design intensity greater than the general use of Germany ZF gearbox, and maintain a constant temperature, excluding ZF gear box used for a period of time will appear abnormally high temperature thermal elongation error, leading to gear damage, and replace the old. Gear box maintenance problems.

（Schematic diagram of the main spindle box）                                                                                                                                                 （Schematic diagram of side milling head）

Seven, track design: rail and screw
The 1 part: the whole line rail adopts Germany / Taiwan original P heavy-duty precision roller guide, a dense uniform slider design collocation, provide superior processing rigidity for the machine, stability
2 standard Z exclusive use of the four axis heavy load roller guide design, design of high speed and high precision four rail line, to overcome the special requirements of high precision machining products.
The 3 part: the whole machine screw by screw C-3 precision double nut multi roll bead screw specifications, collocation of imported Japanese NSK screw special bearings, with one axial feed arrangement to provide maximum rigidity, high precision and stability

Eight, system, electric control box design
1 electric control box using the beam back hanging design, saving machine space, clean and tidy, and the use of high-grade electric control box thermostat, to ensure that the temperature is constant, not due to high temperature lead to failure of electrical equipment.
2 operation box with a wide range of cantilever crane design, convenient operation box machine to use personnel will be pulled to the workpiece by complete tool movements, especially suitable for large-scale automobile die manufacture industry.
Perfect the special structural design of exclusive business, with more than 20 years of experience in professional production technology, to create first-class processing performance!

DMC-2513S 龍門加工中心機技術參數規格表

机械规格
規格ITEM	單位UNIT	規格參數
工作台Table
工作台面積 (長×寬)	mm	2700×1000
T型槽尺寸(槽寬×數量×間距)	mm	22×7×150
T型槽精度等級	-	H7
工作台最大承載工件重量	kg	4500
行程規格Travel
X軸行程	mm	2500
Y軸行程	mm	1300 (副行程1600)
Z軸行程	mm	800
兩柱內側間距/工件可通過最大寬度	mm	1350/1300
主軸鼻端至工作台面距離	mm	200-1000
工作台面至橫樑底面距離	mm	1050
三軸軌道設計及型式
TAPE L(三軸线轨)
軌道規格寬度	mm	X軸:55 / Y軸:55 /Z軸:45
線性滑軌滑塊數量	-	X軸:10只 / Y軸:8只/Z軸:8只
X.Y.Z軸軌道數量	-	X.Y軸:2條重負荷滾柱導軌 Z軸:4條重負荷滾柱導軌
TAPE G(兩線一硬)Z軸硬軌
軌道規格寬度	mm	X軸:55 / Y軸:55 / Z軸:490×250矩型滑枕
線性滑軌滑塊數量	-	X軸:10只 / Y軸:8只
X.Y 軸軌道數量	-	X.Y軸:2條重負荷滾柱導軌
主軸規格型式SPINDLE
TAPE L
主軸傳動方式		直结式傳動
主軸轉速/錐度/拉丁規格	rpm	20-6000 / BT-50 / MAS403-BT50-45
速度Feed
切削進給速度	mm/min	1～6000
三軸快移速度	mm/min	X軸:15000 / Y軸:15000 / Z軸:12000
精度ACCURACY
定位精度	mm	300mm±0.005（任意位置）
重複定位精度	mm	300mm±0.003（任意位置）
其他OTHER
電源要求	-	3Ф380V、50HZ、50KVA
所需氣壓	Kg/cm2	6.5
機械淨重	kg	22000
機械外型尺寸(面寬×面深×高)	mm	7404×4340×4080

關鍵零組件配置清單

序號	名稱	規格	製造廠家
1	米漢納樹脂砂鑄件	FC-30	台資廠
2	控制器 系統	0i-MD	日本-FANUC
3	TAPE F(FANUC)
	主軸電機	ΑiI18/7000	日本-FANUC
	X/Y/Z軸伺服電機	Αif30 / αIF22 / αIF22B	日本-FANUC
	X/Y/Z滾珠螺杆	Φ63-P12 / Φ63-P12 / Φ50-P10	台灣-上銀/銀泰
	X/Y/Z重負荷直線滾柱導軌	55 / 55 / 45	德国：INA/台灣-上銀/銀泰
4	TAPE M(MITSUBISHI)
	主軸電機	SJ-V26	日本-MITSUBISHI
	X/Y/Z軸伺服電機	HF-703 / HF-453 / HF-453BS	日本-MITSUBISHI
	X/Y/Z滾珠螺杆	Φ63-P12 / Φ63-P12 / Φ50-P10	台灣-上銀/銀泰
	X/Y重負荷直線滾柱導軌	55 / 55 / 硬軌	德国：INA/台灣-上銀/銀泰
5	滾珠螺杆三軸軸承	X轴:4072TAC / YZ轴4072TAC 前四後三	日本-Nsk / koyo
6	主軸油冷裝置	冷卻能力:1000W	台資-波英特/高文
7	電器空調恒溫裝置	冷卻能力:929W	台資-波英特
8	自動潤滑裝置	容積式-4L*2	台資-勝祥
9	X/Y伸縮護罩	X軸-1Cr13鋼板式 / Y軸-風琴式	台資-宜德
10	主軸 / 轉速	BT-50 / 6000rpm	台灣-建椿
11	切削液馬達	揚程40m	台資-格蘭富
12	打刀缸自動松刀裝置	12.7倍-180C.C.	台灣-中日
13	鏈板式排屑機	-	内资-阜扬
14	液壓站單元	60L	台資-七洋
15	Z軸氮氣配重裝置	液壓+氮氣 混合式	台資-七洋
16	變壓器	50KVA	台資-顺亮/寶應龍
17	操作面板及配電材料		台灣- 遠瞻
18	繼電器等其他電子元件	-	台灣/日本/法國

標準配置零件清單

序號	名稱	序號	名稱
1	主軸冷卻系統	10.	變壓器
2	主軸吹氣清屑裝置	11.	工作燈，警示燈
3	切削液系統	12.	腳踏松刀開關
4	中央集中式四周自動潤滑系統	13.	水平調整螺絲及墊塊
5	電控箱中央空調	14.	工具箱及調整工具一套
6	半密閉式板金	15.	機台出廠精度檢測報告
7	清潔用之水槍與風槍設備	16.	機台操作與維修說明書
8	雙側螺旋式切屑輸送機	17.	編程、操作说明書
9	鏈條式排屑器及集屑小車	18.	系統參數光碟

Data download